Samsung xpress m262 series, User Manual

Page: 141 / 232

Wireless network setup
141
2. Using a network-connected machine
7 Select the one Network Name(SSID) in the list.
• SSID : SSID (Service Set Identifier) is a name that identifies a wireless
network, access points, and wireless devices attempting to connect
to a specific wireless network must use the same SSID. The SSID is
case sensitive.
• Operation Mode : Operation Mode refers to the type of wireless
connections (see "Wireless network name and network password"
on page 116).
- Ad-hoc : Allows wireless devices to communicate directly with
each other in a peer-to-peer environment.
- Infrastructure : Allows wireless devices to communicate with
each other through an access point.
If your network’s Operation Mode is Infrastructure , select the SSID of the
access point. If the Operation Mode is Ad-hoc , select the machine’s SSID.
8 Click Next .
If the wireless security setting window appears, enter the registered
password (network password) and click
Next .
9 The confirmation window appears, please check your wireless setup. If
the setup is right, click
Apply .
Disconnect the network cable (standard or network). Your machine should
then start communicating wirelessly with the network. In case of Ad-hoc
mode, you can use a wireless LAN and wired LAN simultaneously.
10
Insert the supplied software CD into your CD-ROM drive, and follow the
instructions in the window to set up the wireless network.
18
Turning the Wi-Fi network on/off
If your machine has a display, you can also turn on/off the Wi-Fi from the
machine’s control panel using the
Network menu.
1
Check whether the network cable is connected to the machine. If not,
connect the machine with a standard network cable.
2 Start a web browser such as Internet Explorer, Safari, or Firefox and enter
your machine’s new IP address in the browser window.
For example,
3
Click Login on the upper right of the SyncThru™ Web Service website.