Samsung VP-D455, Service Manual, Page: 44 / 184

4-14
Disassembly and Reassembly
Samsung Electronics
4-2-10 Motor Capstan, Arm Pinch roller, Slide main, Lever Eject
4-2-10(b) Reassembly
1) Assemble the Lever Eject ” .
2) Assemble the Slide Main ∏ .
3) After assemble Arm Pinch Roller Ø to Main
Chassis, and then hang the Spring Lever Pinch ¨ to
Hook of Main Chassis ˆ . (Reference : Detail Part)
4) Secure the Washer Slit ˇ .
5) Assemble the Motor Capstan ´ and secure the
2 Screws Π.
Fig. 4-18 Motor Capstan, Arm Pinch Roller, Slide Main, LeverEject
2 SCREWS
Œ
´
MOTOR CAPSTAN
ˇ
WASHER SLIT
¨
SPRING LEVER PINCH
”
LEVER EJECT
ˆ
MAIN CHASSIS HOOK
Ø
ARM PINCH ROLLER
SLIDE MAIN
∏
MAIN CHASSIS
<DETAIL>
4-2-10(a) Disassembly
Note 1 : When removing and reassembling, be careful
not to giss the Gear Part.
Note 2 : When removing and reassembling, be careful
not to touch the hand in the pinch Roller. (Protection
contamination)
1) Remove the 2 Screws Πand lift up the Motor
Capstan ´ .
2) Eliminate the Washer Slit ˇ and separate Spring
Lever Pinch ¨ from the Hook of Main Chassis ˆ .
3) Lift up the Arm Pinch Roller Ø .
5) Lift up the Slide Main ∏ .
6) Lift up the Lever Eject ” .