Samsung VP-D455, Service Manual, Page: 42 / 184

4-12
Disassembly and Reassembly
Samsung Electronics
4-2-8 Guide Rail Ass’y
4-2-8(a) Disassembly
Note1 : When removing or reassembly, do not touch
Guide Roller S
ˇ and Roller T ¨ . (Protection Stein)
Note2 : When removing or reassembly,the Guide
Roller S
ˇ and T ¨ , be careful not to deform the
Guide Rail Ass’y ´ .(pushing the cautious)
1) Remove the 3 Screws Π, and then lift up Guide Rail
Ass’y ´ .
2) Separate it and turn to countclock wise the Guider
Roller S ˇ and T ¨ .
3 SCREWS
Œ
´
GUIDE RAIL ASS'Y
GUIDE ROLLER S
ˇ
¨
GUIDE ROLLER T
POLE BASE S
ˆ
POLE BASE T
Ø
∏
MAIN CHASSIS
4-2-8(b) Reassembly
1) Assembly the Guide Roller S ˇ and T ¨ as turn to
countclock wise to the Pole Base S ˆ and T Ø .
2) After Pole Base S ˆ and T Ø unloading mode and
then assemble Guide Rail Ass’y ´ to the Main
Chassis ∏ and secure the 3 Screws Œ .
Note 1 : When removing and reassembling Guide Rail
Ass’y, be careful not to assemble point.
Note 2 : Disassemble and reassemble in unload mode.
Note 3 : After assembling, make sure that loading and
unloading work correctly by applying 3V~5V to the
Motor Loading.
Fig 4-16 Guide Rail Ass’y