Samsung VP-D455, Service Manual, Page: 43 / 184

Disassembly and Reassembly
4-13 Samsung Electronics
4-2-9 Motor Loading, Gear Tension, Gear Cam Main
4-2-9(a) Disassembly
1) Eliminate pt welding 2 part Π.
2) Remove the 1 Screw
´
and the 1 Hook
ˇ
, and then
lift up the Motor Loading Ass’y ¨ .
3) Remove the 2 Screws ˆ , and then lift up the Guide
Tension Ø , Gear Cam Main ∏ .
4-2-9(b) Reassembly
1) After assemble and fit Gear Tension Ø , Gear Cam
Main ∏ to assemble point, and then secure the
2 Screws ˆ .
2) Insert Hook of Motor Loading Ass’y ¨ to assemble
point of Main Chassis, and then secure the 1 Screw
´
.
3) After assemble FPC to Motor, and then weld pt
welding 2 parts Π.
Note 1 : When reassembling, confirm that pin of Slide
Main insert into Cam of Gear Cam Main.
Œ
PT WELDING 2 POINTS
´
2 SCREWS
ˆ
Ø
GEAR TENSION
GEAR CAM MAIN
∏
ˇ
1 HOOK
¨
MOTOR LOADING ASS'Y
ASSEMBLE POINT
(TWO ARROWS)
Fig. 4-17 Motor Loading, Gear Tension, Gear Cam Main