11-6) Operation of Ice-Maker
1. Connect the water-supply line to the supplying valve of the refrigerator to supply water.
(See the water tube connection procedure)
2. Push bucket to the end so that guide-ice of ice-maker is not in contact with the end of bucket.
(If the end of bucket is in contact with the guide-ice of the ice-maker, the ice-maker will determine
that there is enough ice and does not make ice thereafter.)
3. With a newly installed refrigerator, allow about 6 hours for the refrigerator to make ice normally and
discard the made ice for some times to remove impurities.
4. To get enough ice stored in the storage bin, use the ice dispenser normally after operating the
ice-maker for about 24 hours.
11-5) Designation of major components of Ice-Maker
(TRAY-ICE)
(EJECT-SENSOR)
COVER-SENSOR
SCREW
SUPT-RUBBER
FIXER-SENSOR
ICE-MAKER, KIT
(EJECT-MOTOR)
HOR-SWITCH
TEST-SWITCH
GUIDE-ICE
KNOB-TOUCH
Push the bucket to the end so that the
GUIDE-ICE of the ICE-MAKER is not in
contact with the end of bucket.
LEVER-SWITCH
60
