69
13-4) Temperature controller
SR-S24NTA
SR-S24FTA
Disassemble the temperature controller by
detaching the snaps of the front cover of
the temperature controller using (-) driver
or the likes and pulling it to the front.
Replace PCB base by disassembling the
wire housing connected to PCB and
removing 3 screws.
Assembly is the reverse procedure of
disassembly.
Disassemble the temperature controller by
pulling it out to the front while holding
the bottom side of the front cover of the
dispenser.
Replace PCB base by disassembling the
wire housing connected to PCB and
removing 3 screws.
Assembly is the reverse procedure of
disassembly.
70
14. Assembly and Disassembly of HINGE-UPP ASSÕY
2. Assembling procedure of Hinge-Upp AssÕy
1) Place the Hinge-Upp AssÕyon the Reinf-Hinge Upp according to the direction
and load the Hinge-Upp AssÕywhile rotating it to assemble.
2) After assembly of Fixer-Hinge Upp to Reinf-Hinge Upp, finish the assembly
by rotating toward the direction .
3. Disassembly procedure of Hinge-Upp AssÕy
1) Disassembly is the reverse procedure of assembly.
1. Structure of Hinge-Upp AssÕy