to use motion detection
It detects a motion that meets all conditions specified by sensitivity, size and area.
1.
Select <
Sensitivity
> tab to set the
sensitivity level. You can set the sensor’s
sensitivity to detect a motion out of the
background from the monitoring video.
J
`
In a situation that definitely distinguishes
objects out of backgrounds, set this to
a low sensitivity level. For opposite case
that is hard to distinguish objects like low
illuminated situation, set this to a high
level.
2.
Select <
Size
> tab.
You can limit the minimum/maximum
size of motion to be detected.
•
Minimum size : To set the minimum
size of detected motions, select
<
minimum size
> and then point
and drag to the desired size on the
screen using the mouse.
•
Maximum size : To set the maximum
size of detected motions, select
<
maximum size
> and then point
and drag to the desired size on the
screen with your mouse.
J
`
Motions smaller than the specified minimum size or bigger than the maximum size are not
detected. To avoid unintended detections caused by great and small noises, set minimum/
maximum motion sizes appropriately in accordance to your environments.
Note that same motions on the same location can be differently detected in their detection size;
it is recommended to consider and include the tolerable difference when setting the minimum/
maximum detection sizes.
English
_103
●
Setup
Screen
