Samsung SNF-8010VM User Manual Download

Page: 14 / 140

overview

14_

overview

Item

Description

Cover top

SNF-8010

Case cover used to protect the main unit.

SNF-8010VM

Case cover used to protect the lens and the main unit.

Microphone hole

A microphone is embedded.

It is applicable only to the SNF-8010 model.

Power Port

Used to plug the power cable.

Alarm I/O Port

ALARM IN

Used to connect the alarm input sensor.

ALARM OUT

Used to connect the alarm output signal.

GND

Common port for alarm output signal.

Network Port

Used to connect the PoE or Ethernet cable for network connection.

Audio Out Jack

Used to connect to speakers. (green)

Audio In Jack

Used to connect to a microphone. (pink)

M12 Female

connector cable

Connect to the M12 Male connector cable for power supply and network

connections.

Summary of Contents for SNF-8010VM













































































































































Search results

Summary of Contents for SNF-8010VM

Reviews:

Related manuals for SNF-8010VM

Brands by name

Popular brands

Samsung SNF-8010VM, User Manual

Search results

Summary of Contents for SNF-8010VM

Reviews:

Related manuals for SNF-8010VM

Brands by name

Popular brands