background image

If any portion of this section is held invalid or unenforceable 

under any particular circumstance, the balance of the section 

is intended to apply, and the section as a whole is intended 

to apply in other circumstances.
It is not the purpose of this section to induce you to infringe 

any patents or other property right claims or to contest 

validity of any such claims; this section has the sole purpose 

of protecting the integrity of the free software distribution 

system which is implemented by public license practices. 

Many people have made generous contributions to the 

wide range of software distributed through that system 

in reliance on consistent application of that system; it is 

up to the author/donor to decide if he or she is willing to 

distribute software through any other system and a licensee 

cannot impose that choice. This section is intended to make 

thoroughly clear what is believed to be a consequence of the 

rest of this License.

12.

  If the distribution and/or use of the Library is restricted 

in certain countries either by patents or by copyrighted 

interfaces, the original copyright holder who places 

the Library under this License may add an explicit 

geographical distribution limitation excluding those 

countries, so that distribution is permitted only in or 

among countries not thus excluded. In such case, this 

License incorporates the limitation as if written in the 

body of this License.

13.

  The Free Software Foundation may publish revised and/ 

or new versions of the Lesser General Public License 

from time to time. Such new versions will be similar 

in spirit to the present version, but may differ in detail 

to address new problems or concerns. Each version 

is given a distinguishing version number. If the Library 

specifies a version number of this License which applies 

to it and “any later version”, you have the option of 

following the terms and conditions either of that version 

or of any later version published by the Free Software 

Foundation. If the Library does not specify a license 

version number, you may choose any version ever 

published by the Free Software Foundation.

14.

  If you wish to incorporate parts of the Library into 

other free programs whose distribution conditions are 

incompatible with these, write to the author to ask for 

permission. For software which is copyrighted by the 

Free Software Foundation, write to the Free Software 

Foundation; we sometimes make exceptions for this. Our 

decision will be guided by the two goals of preserving the 

free status of all derivatives of our free software and of 

promoting the sharing and reuse of software generally.

no warranty

15.

  BECAUSE THE LIBRARY IS LICENSED FREE 

OF CHARGE, THERE IS NO WARRANTY FOR 

THE LIBRARY, TO THE EXTENT PERMITTED BY 

APPLICABLE LAW. EXCEPT WHEN OTHERWISE 

STATED IN WRITING THE COPYRIGHT HOLDERS 

AND/OR OTHER PARTIES PROVIDE THE LIBRARY 

“AS IS” WITHOUT WARRANTY OF ANY KIND, 

EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT 

NOT LIMITED TO, THE IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR 

PURPOSE. THE ENTIRE RISK AS TO THE QUALITY 

AND PERFORMANCE OF THE LIBRARY IS WITH YOU. 

SHOULD THE LIBRARY PROVE DEFECTIVE, YOU 

ASSUME THE COST OF ALL NECESSARY SERVICING, 

REPAIR OR CORRECTION.

16.

  IN NO EVENT UNLESS REQUIRED BY APPLICABLE 

LAW OR AGREED TO IN WRITING WILL ANY 

COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO 

MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY 

AS PERMITTED ABOVE, BE LIABLE TO YOU FOR 

DAMAGES, INCLUDING ANY GENERAL, SPECIAL, 

INCIDENTAL OR CONSEQUENTIAL DAMAGES 

ARISING OUT OF THE USE OR INABILITY TO USE THE 

LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS 

OF DATA OR DATA BEING RENDERED INACCURATE 

OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES 

OR A FAILURE OF THE LIBRARY TO OPERATE WITH 

ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER 

OR OTHER PARTY HAS BEEN ADVISED OF THE 

POSSIBILITY OF SUCH DAMAGES.

enD of termS anD conDitionS
How to apply these terms to your new 

Libraries 

If you develop a new library, and you want it to be of the 

greatest possible use to the public, we recommend making 

it free software that everyone can redistribute and change. 

You can do so by permitting redistribution under these terms 

(or, alternatively, under the terms of the ordinary General 

Public License).
To apply these terms, attach the following notices to the 

library. It is safest to attach them to the start of each source 

file to most effectively convey the exclusion of warranty; 

and each file should have at least the “copyright” line and a 

pointer to where the full notice is found. one line to give the 

library’s name and an idea of what it does.
Copyright (C) year name of author
This library is free software; you can redistribute it and/ or 

modify it under the terms of the GNU Lesser General Public 

License as published by the Free Software Foundation; 

either version 2.1 of the License, or (at your option) any 

later version.
This library is distributed in the hope that it will be useful, 

but WITHOUT ANY WARRANTY; without even the implied 

warranty of MERCHANTABILITY or FITNESS FOR A 

PARTICULAR PURPOSE. See the GNU Lesser General 

Public License for more details.
You should have received a copy of the GNU Lesser General 

Public License along with this library; if not, write to the Free 

Software Foundation, Inc., 51 Franklin Street, Fifth Floor, 

Boston, MA 02110-1301 USA Also add information on how 

to contact you by electronic and paper mail. You should also 

get your employer (if you work as a programmer) or your 

school, if any, to sign a “copyright disclaimer” for the library, if 

necessary. Here is a sample; alter the names: Yoyodyne, Inc., 

hereby disclaims all copyright interest in the library ‘Frob’ (a 

library for tweaking knobs) written by James Random Hacker. 

signature of Ty Coon, 1 April 1990 Ty Coon, President of Vice.

copyright (c) 1998-2000 university college 

London 

All rights reserved.
Redistribution and use in source and binary forms, with or 

without modification, is permitted provided that the following 

conditions are met:

1.

  Redistributions of source code must retain the above 

copyright notice, this list of conditions and the following 

disclaimer.

2.

  Redistributions in binary form must reproduce the above 

copyright notice, this list of conditions and the following 

disclaimer in the documentation and/or other materials 

provided with the distribution.

3.

  All advertising materials mentioning features or use of this 

software must display the following acknowledgement: 

This product includes software developed by the 

Summary of Contents for SNF-8010VM













































































































































Reviews: