J
`
Motion detection works based on state of the Source View screen of <
Video profile
>.
When a motion appears in the Source View screen, the alarm goes off, even if no motion occurs
in the Dewarp view.
`
Before using, set the minimum and maximum motion sizes to suit desired motion range to be
detected.
`
Detected size of an object may have difference with the actual size according to its shape.
`
Up to 16 objects from the top side of the screen can be displayed.
`
In the following cases, effective functioning of motion detection may be degraded or cause
improper detection.
-
The object color or brightness is similar to the background.
-
Small activities around the border area of the camera’s field of view.
-
Multiple movements continue occurring at random due to a scene change, rapid lighting
changes or other reasons.
-
A fixed object continues moving in the same position.
-
Motions of less position changing such as approaching to the camera or fading away from the
camera.
-
Moving object approaches to the camera too close
-
An object hides other objects behind.
-
Two or more objects overlap or one object divides in multiple portions.
-
Too fast object (for a proper detection, one object should be found overlapping between
contiguous frames).
-
Reflection / blur / shadow due to a strong light such as direct sunlight, illumination, or headlamp.
-
In severe snow, rain, wind or in dawn / dusk.
setup screen
102_
setup screen
