Samsung SLS-BU10G, User Manual, Page: 60 / 123

Chapter 3 The Network Extender Admin Website (Local)
Verizon 4G LTE Network Extender 2 for Enterprise User Guide v1.0 50
Copyright © 2019, All Rights Reserved.
Table 11. The Network Extender Advanced Settings Tab
Item Description
Last Data Refresh This is the time the data on the page was last refreshed.
My Network Extender
Information This table shows the network identifier information for the Network Extender.
Where:
•
Network ID: PLMN ID
•
Cell ID: ECGI
•
PCI: PCI
The Network ID and Cell ID are linked by a hyphen.
Transmit Power You can use the slider to adjust the power transmitted by the Network Extender
from full power (100% = 27 dBm) to lowest power (0% = 17 dBm). This is achieved
by applying digital attenuation in 0.1 dB steps from 17 dBm to 27 dBm.
Frequency Selection User can manually select Network Extender’s frequency from available
frequencies, to override the default value assigned by the Serving Network.
Frequency changes only should be made by advanced users with knowledge of
Verizon’s Network and Band support of the 4G LTE devices; it may affect Device
Connectivity, Network Performance and Handoff.
In most cases, the default setting on the Network Extender is the best option.
Priority Preferred frequencies in order,
•
Priority 1- highly recommended priority
•
Priority 2- recommended priority
•
Priority 3- not recommended priority.
Band Indicator LTE frequency band information. Currently band class 4 and 13 are supported.
EARFCN Downlink E-UTRA Absolute Radio Frequency Channel Number for downlink.
Neighboring Cells
Detected in Licensed
Band These are nearby cell towers and other Network Extender's detected during
startup.
Network ID The unique identifier of Verizon's Wireless network.
Cell ID The unique identifier assigned to the Network Extender in the Verizon Wireless
network.
Physical Cell ID (PCI) Physical Cell Identifier (PCI). 4G LTE Wireless devices use this identifier for hand-
offs.
Type The type of neighboring cell - Network Extender or macro cell tower.
RSRP (dBm) The signal strength of the neighboring cells that your Network Extender detected
during its initialization.
Refresh Button This reloads the data on the page and retrieves the latest settings.
Save Button This commits any user modified values (Transmit Power) and applies it.
Cancel Button This reloads the original settings and cancels all unsaved modifications.