background image

A

DDITIONAL

 F

EATURES

10

.

9

10

9

If you select “No”, in case of All and Rx Only, the display 
asks you if you want to print a local copy of the faxes 

received. Select “Yes” or “No”. 

10

If you select “Yes”, the incoming faxes will be printed after it 
has been forwarding as an e-mail. If you select “No”, the 

incoming faxes will not be printed, only the E-mail will be 

sent. 

Managing the E-mail Log

You can print the list of the e-mails recently sent from the 

machine and delete the e-mail log.

Printing an E-mail Log

1

Press 

Menu

 until “Report” displays on the top line.

2

Press the scroll buttons until “Email Sent Report” displays on 
the bottom line and then press 

Enter

The list of e-mails sent from the machine prints.

Clearing an E-mail Log

1

Press 

Menu

 until “Sys. Admin Tools” displays on the top 

line.

2

Press the scroll buttons until “Clear Memory” displays and 
press 

Enter

.

3

Press the scroll buttons until “Email Sent History” displays on 
the bottom line and then press 

Enter

The list of e-mails sent from the machine is deleted.

N

OTE

The E-mail Sent History is printed automatically when the 

entries reach 50 and the entries that are printed will be deleted 

automatically.

Summary of Contents for SCX-6220











































































































































































































































































































































Reviews: