Samsung SCX-6220 User Manual Download

Page: 22 / 330

Thank you for purchasing Samsung multifunctional

product. This machine provides printing, copying,

scanning, faxing(SCX-6320F only), and e-mailing(SCX-

6320F only) functions!

This chapter provides step-by-step instructions on

setting up the machine, and installing the software.

This chapter includes:

• Unpacking

• Component Location

• Control Panel Functions

• Making Connections

• Installing the Drum and Toner Cartridges

• Turning the Machine On

• Loading Paper

• Setting the Paper Size and Type

• Changing the Display Language

• Using Save Modes

• Setting the Localization

ETTING

STARTED

Summary of Contents for SCX-6220











































































































































































































































































































































Search results

Summary of Contents for SCX-6220

Reviews:

Related manuals for SCX-6220

Brands by name

Popular brands

Samsung SCX-6220, User Manual

Search results

Summary of Contents for SCX-6220

Reviews:

Related manuals for SCX-6220

Brands by name

Popular brands