manualshive.com logo in svg

Samsung SCX-6220, User Manual

Share
Download
Samsung SCX-6220 User Manual Download Page 2

This manual is provided for information purposes only. All information included herein is 
subject to change without notice. Samsung Electronics is not responsible for any changes, 
direct or indirect, arising from or related to use of this manual.

© 2004 Samsung Electronics Co., Ltd. All rights reserved.

• SCX-6220, SCX-6320F and Samsung logo are trademarks of Samsung Electronics 

Co., Ltd.

• PCL and PCL 6 are trademarks of Hewlett-Packard company.
• Microsoft, Windows, Windows 9x, Windows Me, Windows 2000, Windows NT 4.0 

and Windows XP are registered trademarks of Microsoft Corporation.

• PostScript 3 is a trademark of Adobe System, Inc.
• UFST® and MicroType™ are registered trademarks of Agfa division of Bayer Corp.
• TrueType, LaserWriter and Macintosh are trademarks of Apple Computer, Inc.
• All other brand or product names are trademarks of their respective companies or 

organizations.

Summary of Contents for SCX-6220











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands