Samsung R530 User Manual Download Page 117

Page: 117 / 133

117

The shortcut icons are not displayed on the

screen even if I press the shortcut key.

The shortcut icons only appear when the Easy

Display Manager program is installed.

I have connected a monitor (or projector) to the

computer, but the colors on the monitor are

abnormally displayed.

Check if the monitor and computer are properly

connected with the signal cable and reconnect the

cable if necessary.

I am trying to view the screen through a TV by

connecting it through the HDMI port, but the

edge of the screen is not displayed.

It is recommended using a notebook computer

screen or monitor for documents and Internet pages.

Although HDMI is good for watching videos, the

edges may be cut or the text may be blurred on a

HDMI TV.

I cannot configure the Image Sharpness in the

NVIDIA Control Panel of [NVIDIA Graphics].

The

NVIDIA Control Panel >Adjust desktop Color

Settings > Image Sharpening

item is set to

None

and will not be configurable. This is normal.

This function is only available for old graphic

chipsets.

Bremen_R530_V7_eng.indb 117

2011-04-27 오후 5:30:09

Summary of Contents for R530






































































































































Search results

Summary of Contents for R530

Reviews:

Related manuals for R530

Brands by name

Popular brands

Samsung R530, User Manual

Search results

Summary of Contents for R530

Reviews:

Related manuals for R530

Brands by name

Popular brands