Samsung R530 User Manual Download Page 92

Page: 92 / 133

Shutdown the system, close the LCD panel and

place the computer upside down on a flat surface.

Pull the two battery latches

outwards

, then

remove the battery.

Battery

Please refer to the following instructions when running the computer on battery power without connecting the AC

power.
A Lithium-Ion smart battery is supplied with this computer.

Before You Start!



Carefully read and follow the precautions printed on the battery before using the battery.



Before using your computer for the first time after purchasing it, charge the battery completely.

Precautions



Use only chargers specified in the User Manual.



Never heat the battery pack, put it near or in a fire or use at a temperature higher than 60°C, as this may cause fire.



Never cause a short circuit between the battery pack terminals or disassemble the battery pack.



Carefully read and follow the precautions printed on the battery and the safety instructions in the User Manual before using the

battery.



Please refer to the system operation environment of this manual and operate and store the battery at room temperature.

Installing/Removing the Battery

Bremen_R530_V7_eng.indb 92

2011-04-27 오후 5:29:32

Summary of Contents for R530






































































































































Search results

Summary of Contents for R530

Reviews:

Related manuals for R530

Brands by name

Popular brands

Samsung R530, User Manual

Search results

Summary of Contents for R530

Reviews:

Related manuals for R530

Brands by name

Popular brands