Samsung R530 User Manual Download Page 31

Page: 31 / 133

Unintentional Emitter per FCC Part 15

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:(1) this

device may not cause harmful interference, and () this

device must accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply

with the limits for a Class B digital device pursuant to

Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency

energy. If not installed and used in accordance with

the instructions, it may cause harmful interference.

If this equipment does cause harmful interference to

radio or television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or

more of the following measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and

receiver.



Connect the equipment into an outlet on a

circuit different from that to which the receiver is

connected.



Consult the dealer or an experienced radio/TV

technician for help.

If necessary, the user should consult the dealer or an

experienced radio/television technician for additional

suggestions. The user may find the following booklet

helpful: “Something About Interference.”

This is available at FCC local regional offices. Our

company is not responsible for any radio or television

interference caused by unauthorized modifications of this

equipment or the substitution or attachment of connecting

cables and equipment other than those specified by our

company. The correction will be the responsibility of the

user. Use only shielded data cables with this system.

Bremen_R530_V7_eng.indb 31

2011-04-27 오후 5:27:21

Summary of Contents for R530






































































































































Search results

Summary of Contents for R530

Reviews:

Related manuals for R530

Brands by name

Popular brands

Samsung R530, User Manual

Search results

Summary of Contents for R530

Reviews:

Related manuals for R530

Brands by name

Popular brands