87
Setting a Supervisor Password
A Supervisor Password is required to turn the computer
on or to start the System Setup.
When setting a Supervisor Password, users other than a
supervisor cannot use the computer.
1
Select the
Security
menu in the BIOS Setup.
2
In the
Set Supervisor Password
item, press
<
Enter
>.
3
Enter a password, press <
Enter
>, re-enter the
password for confirmation, and press <
Enter
> again.
The password can be up to 8 alphanumeric
characters. Special characters are not allowed.
4
The supervisor password has been set.
The supervisor password is required to turn the
computer on or to enter the BIOS Setup.
For some models, if the password entered message
appears in the
Setup Notice
window, the settings are
not complete until the
Enter
key is pressed.
Setting a Boot Password
When setting a password, you have to enter a password to use the computer or enter the BIOS Setup.
By configuring a password, you can restrict system access to authorized users only and protect data and files saved
on the computer.
Before You Start!
Do not lose or forget your password.
If you have forgotten your password, contact a Samsung service center. In this case, a service fee will be charged.
XXXXXXXX
Bremen_R530_V7_eng.indb 87
2011-04-27 오후 5:29:07
