Samsung R530 User Manual Download Page 126

Page: 126 / 133

How to view the Bluetooth help information.

Press the

W F1

key combination to launch

Windows Help and search for Bluetooth related

items in the Help section.

When no headset is found or cannot be

connected

If the headset is already connected to another

device, you will not be able to find the headset and

cannot connect to the headset even if the headset is

found. Disconnect the connection to the other device

and then start the search again.

If the headset is connected to a power adapter, you

cannot make a Bluetooth connection.

Disconnect the power adapter and then retry.

In general, a Bluetooth headset has operating

modes, On/Off mode and Pairing mode.

To connect the headset to another Bluetooth device

such as a PC or cell phone, the headset must be in

Pairing mode.

Switch the headset to Pairing mode and then retry

the search operation.

In general, the headset in Pairing mode

automatically returns to On/Off mode after a certain

period of time.

Usage Instructions



Generally, Bluetooth devices deliever stable

performance while connected within a 3m(10 ft.)

distance.



For Bluetooth to operate smoothly, use the computer in

an open environment with no walls or obstacles in the

way and having low radio interference.



You can connect to only one Bluetooth device at a

time for a phone connection, data syncing, electronic

business card exchange, FAX transmission/reception,

sound related functions, and serial port functions.



It is recommended using only one Bluetooth device at a

time as connecting multiple Bluetooth or other wireless

devices at the same time may slow or destabilize the

Bluetooth connection.



Data communications via Bluetooth may be poor when

the CPU load is at full capacity or there are insufficient

system resources.



The Bluetooth function of a Bluetooth PDA, mobile

phone, mouse or keyboard may be turned off. To

use them in connection with a Samsung computer

supporting Bluetooth, you must check if the Bluetooth

function of the device to connect to is turned on.

For the procedures on turning on the Bluetooth function

of a device, refer to the relevant device manual.



The services provided by Bluetooth devices may

vary depending on their capabilities. For the services

provided by the Bluetooth device, refer to the device

manual.

Bluetooth (Optional)

Bremen_R530_V7_eng.indb 126

2011-04-27 오후 5:30:10

Summary of Contents for R530






































































































































Search results

Summary of Contents for R530

Reviews:

Related manuals for R530

Brands by name

Popular brands

Samsung R530, User Manual

Search results

Summary of Contents for R530

Reviews:

Related manuals for R530

Brands by name

Popular brands