Samsung R523 User Manual Download Page 11

Page: 11 / 87

If water or another

substance enters the

power input jack, AC

adapter or the computer,

disconnect the power cord

and contact the service

center.

Damage to the device within

the computer may cause

electric shock or fire hazard.

Keep the power cord or

outlet clean so that they are

not covered with dust.

Failing to do so may result

in fire.

Do not bend the power cord

excessively or do not place

a heavy object over the

power cord. It is especially

important to keep the

power cord out of reach of

infants and pets.

If the cord is damaged, it

may cause electric shock

or fire.

Connect the power cord to

an outlet or multiple power

plug (extended cable) with

a ground terminal.

Failing to do so may result

in electric shock.

Power Related

Warning

Failing to follow instructions marked with this symbol may cause personal injury and even fatality.

Summary of Contents for R523
























































































Search results

Summary of Contents for R523

Reviews:

Related manuals for R523

Brands by name

Popular brands

Samsung R523, User Manual

Search results

Summary of Contents for R523

Reviews:

Related manuals for R523

Brands by name

Popular brands