Samsung R523 User Manual Download Page 82

Page: 82 / 87

Product Specifications

The system specifications may differ depending on the derived models.

For detailed system specifications, refer to the product catalogue.

NP-R523/R423

CPU (Optional)

AMD Athlon II Dual-Core, AMD Turion II Dual-Core

Main Memory (Optional)

Memory type: DDR2 SODIMM

Main Chipset (Optional)

AMD RX881

Hard Disk Drive (Optional)

9.5mmH SATA HDD

Graphics (Optional)

ATI Radeon HD 5145/5470

Operating Environment

Temperature : -5~40°C for storage, 10~32°C when operating
Humidity : 5~90% for storage, 20~80% when operating

Operating Voltage

100 - 240VAC

Frequency

50/60Hz

Output Power (Optional)

60W/90W (Optional)

Output Voltage (Optional)

19V 3.16A (60W) / 19V 4.74A (90W)



Optional components may not be provided or different components may be provided

depending on the computer model.



The system specifications are subject to change without notice.



You must use only memory modules with the specifications (DDR2 or DDR3) printed on the

memory slot that appears when you open the memory compartment cover at the bottom.

Summary of Contents for R523
























































































Search results

Summary of Contents for R523

Reviews:

Related manuals for R523

Brands by name

Popular brands

Samsung R523, User Manual

Search results

Summary of Contents for R523

Reviews:

Related manuals for R523

Brands by name

Popular brands