OfficeServ 7100
PROGRAMMING
TECHNICAL MANUAL
PART 2 MAY 2009
MMC: 329
RING GROUP
DESCRIPTION:
[Available Only with v.4.30 or Higher]
This MMC is used to configure OfficeServ Connect groups. These groups allow you
to set up to 5 devices to ring simultaneously with the station. These devices can be
DLI, SLI, SIP, ITP, WIP, or MOBEX ports. Calls will follow the forwarding of the primary
station only. These groups are primarily used by the MOBEX feature to allow calls to
ring to both a keyset and a cell phone at the same time.
NOTE:
Calls are delivered to all 5 devices simultaneously, however MOBEX ports will
experience a slight delay as the system must access and dial a trunk in order
to ring the cell phone. This delay typically 10 seconds or less.
PROGRAM KEYS
UP & DOWN
Used to scroll through options
KEYPAD
Used to enter selections
SOFT KEYS
Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD
Used to clear previous entry
ACTION
DISPLAY
1. Press TRANSFER 329.
Display shows first station port.
[2001]RING GROUP
MEMBER 1 :NONE
2. Press UP or DOWN to select a station
OR
[2001]RING GROUP
MEMBER 1 :NONE
Press RIGHT soft key to set members
3. Press UP or DOWN to select a member
OR
[2001]RING GROUP
MEMBER 1 :NONE
Press RIGHT soft key to set member directory
number
4. Press UP or DOWN to select next station
OR
[2001]RING GROUP
MEMBER 1 :4300
Press TRANSFER to exit programming
DEFAULT DATA: NONE
RELATED ITEMS: OFFICESERV CONNECT FEATURE
Home Page
Table of Contents