OfficeServ 7100
PROGRAMMING
TECHNICAL MANUAL
PART 2 MAY 2009
MMC: 830
ETHERNET
PARAMETERS
DESCRIPTION:
This MMC provides the means to configure the Internet Protocol (IP) addressing of
the OfficeServ 7100 system MP10/MP10a card. This MMC must be utilized if there
are ITP series phones and/or MGI cards used on the system. Even without any VoIP
applications you still have to configure the MP10/MP10a IP for LAN based
OfficeServ 7100 box connections.
¾
NOTE: When changing any IP address/value, listed below, three digits must
be input for each (octet) field. Example 192.168.1.10 input must be: 192 168
001 010
¾
PLEASE ALSO NOTE: The first 3 parameters:
SYSTEM IP ADDR, SYSTEM
GATEWAY, and SYSTEM NET MASK
are stored separate from the main
system database, thus will not be defaulted when MMC811 “CLEAR
MEMORY” is performed. Furthermore, any changes to these parameters
will
not be applied
until the MP is reset.
•
SYSTEM IP ADDR:
Specifies the IP address for the MP10/MP10a card.
•
SYSTEM GATEWAY:
Specifies the designated LAN gateway IP address used
for contacting IP devices beyond the local network subnet.
•
SYSTEM NETMASK:
Specifies the IP subnet mask. This parameter is used by
the system to calculate the range of IP devices (subnet) that are within “direct
reach” of the MP10/MP10a (without having to go through the designated
network IP gateway).
•
SYSTEM RESET:
Prompt to restart system MP10/MP10a when system IP
address is changed. This reset is similar to MMC 811.
You must use this reset
for any changes in this MMC to take effect.
•
SYSTEM IP TYPE:
Defines which IP addressing relationship is used for
communications to and from the MP10/MP10a card.
PRIVATE IP ONLY – the system assumes all ITP/VOIP devices are on the
same network. Traffic involving non-IP based devices (such as analog trunks,
digital keysets, voicemail, etc.) are handled VIA the MGI card.
PRIVATE w PUBLIC – the system knows that there is a mixture of ITP/VOIP
devices on the same network and on remote network(s), thus communicates
accordingly based upon the entries in MMC 840 (for ITP phones) or MMC
838 (for other MP10/MP10a).
Home Page
Table of Contents