OfficeServ 7100
PROGRAMMING
TECHNICAL MANUAL
PART 2 APRIL 2007
MMC: 316
PRESET FWD NO ANSWER
DESCRIPTION:
Allows a technician to assign a default destination for FNA to each station on the
system. These destinations may be different for each station or they may be the
same. The preset destination will be temporarily overwritten if the station user enters
a different FNA destination. If the user cancels the new destination, the preset
destination will once more be in effect. If a station user has a FNA key, the LED will
not indicate Preset Forward No Answer. Preset Forward No Answer time follows the
station forward no answer timer. There is also an option (OPT) to select whether the
forward applies to internal calls (I), outside calls (O) or both (BOTH).
Notes: This destination must be internal to the system. External numbers cannot be
programmed. You must set PRE FWD BUSY to ON in MMC 210 for this feature to
work.
PROGRAM KEYS
UP & DOWN
Used to scroll through options
KEYPAD
Used to enter selections
SOFT KEYS
Move cursor left and right
SPEAKER
Used to store data and advance to next MMC
HOLD
Used to clear previous entry
ANS/RLS
Used to select ALL
ACTION
DISPLAY
1. Press TRANSFER 316
Display shows
[201] PRESET FNA
NONE OPT:BOTH
Press RIGHT soft key to advance cursor
OR
[ALL] PRESET FNA
NONE OPT:BOTH
Press ANS/RLS to select ALL.
2. Dial valid number via keypad
OR
[201] PRESET FNA
202 OPT:BOTH
Press UP or DOWN to make selection
Press RIGHT soft key to return to step 1.
Home Page
Table of Contents