87
4
▶
For Windows 7 / Vista
Select Internet Protocol Version 4(TCP/IPv4)
from the list of Network Components and click
Properties.
▶
For Windows XP
Click General tab and select a LAN driver from
Connect using:. Select Internet Protocol(TCP/
IP) and click Properties.
The displayed LAN driver may vary depending on
the LAN device type.
Click Install to add a network component as shown
in the figure below: You can add a client, a service,
or a protocol.
The Network Component name may differ
depending on the Operating System Installed.
To add a network component, click Install in the
screen shown in the figure above. You can add
clients, services, and protocols.
5
Configure the IP settings.
When using DHCP, select Obtain an IP address
automatically. To use a static IP address, select
Use the following IP address, and set the IP
address manually.
When not using DHCP, ask your network administrator
for the IP address.
6
When you have completed the settings, click the OK
button.
The network settings have been completed.
