Samsung NP-P580 User Manual Download

Page: 107 / 159

107

Setting a User Password

Users can start the system with a user password, but
cannot enter the System Setup. By doing this, you can
prevent other users from entering Setup.

Before configuring a user password, a

supervisor

password

must have been configured. Deactivating the

supervisor password also deactivates the user password.

In the Set User Password item, press <Enter> and
complete the procedures from Step 3 of Setting a
Supervisor Password.

Setting Up a Boot Password

To setup a boot password, the administrator password
(Set Supervisor Password) should be set in advance.

Set the Password on boot item to Enabled.

Once a boot password is set, you have to enter a
password to boot up the computer.

Setting up a Hard Disk Drive Password
(Optional)

A supervisor password must be set using the Set
Supervisor Password menu.

If you set a password for a hard disk drive, it cannot be
accessed from another computer.

Press <Enter> in the Set HDD Password

item and define

a password as described in Step 3 of the Setting up the
Supervisor Password.

The hard disk drive password setting function is not
provided for some models.

Changing the hard disk drive password

For security purposes, you can only change a hard
disk drive password after restarting the computer by
pressing the computer Power button.

If you cannot change the hard disk drive password or
the HDD Password Frozen message appears when
entering the BIOS Setup and then selecting Security
> HDD Password, press the Power button to turn the
computer on again.

Deactivating the Password

Press <Enter> on the password to be deactivated.

For example, to deactivate a supervisor password in
the Set Supervisor Password item, press <Enter>.

In the Enter Current Password item, enter the

currently configured password and press <

Enter>.

Leave the Enter New Password

item field empty,

and press <Enter>.

Leave the

Confirm New Password

field empty, and

press <Enter>.

The password is deactivated.

For some models the password is only canceled if the
Enter key is pressed in the Setup Notice window.

Summary of Contents for NP-P580
































































































































































Search results

Summary of Contents for NP-P580

Reviews:

Related manuals for NP-P580

Brands by name

Popular brands

Samsung NP-P580, User Manual

Search results

Summary of Contents for NP-P580

Reviews:

Related manuals for NP-P580

Brands by name

Popular brands