Basic Setup 1-
12
Setup 1-12
Basic Setup 1-
13
Setup 1-13
5. TV with several inputs. An input is available. MovieBeam
and other device send audio through surround sound system.
When you are using a surround sound system, audio outputs are connected to the surround sound
system instead of to the TV. You will need to purchase an additional composite video cable or use
the S-video cable.
1. Unplug one device from the TV and plug it into the appropriate connectors marked IN on your
MovieBeam receiver. The other end should be plugged into the connectors marked OUT on
the device.
2. Connect the A/V (and S-video cables) from the MovieBeam receiver’s “OUT” connectors to the
TV’s “IN” connectors as shown below. (Using the S-video cable is recommended.)
S/PDIF
S/
P
D
IF
DVD
or other
S/PDIF device
���
OUT
IN
TV
Surround
sound
R AUDIO L
S-VIDEO
Input #2
Input #1
VIDEO
� �� ���
� �� ���
MovieBeam
receiver
