Finishing Setup, Renting and Watching Movies 3-13
As you move the antenna, audio beeps increase in frequency as the signal gets better and
decrease as the signal gets worse. To improve reception, you may need to extend the ends of the
antenna by sliding them out.
Once the antenna signal is set, the beeping changes to a different steady beeping sound.
If you are experiencing difficulty, highlight More Information on the Antenna Setup screen or refer
to Troubleshooting in Chapter 4.
When the antenna signal is adequate, you can choose to watch a short video that tells you about
the MovieBeam receiver’s features or you can go to the main menu.
When setup is complete, the MovieBeam receiver continuously receives new movies through
the antenna. All you need to do is to make sure the unit is plugged in and that the phone line is
connected. If the antenna is moved or becomes incapable of receiving the signal, the antenna
LED on the MovieBeam receiver will light and an “Antenna Warning” will be displayed. Select the
“Antenna Warning” to display an adjustment screen similar to the antenna setup described above.
