ENGLISH-35
03
AD
VANCED
OPER
ATION
Use of field specification checking mode
Data
Sub-menu
Main menu
1.
If you want to use the field specification checking mode for your wired remote controller, press the Set and
[∧]
buttons at the same time for more than 3 seconds.
2.
Refer to the list of field specification for your wired remote controller on the next page, and select the desired menu.
f
f
Using the
[∧]/[∨]
buttons, select a main menu number and press the
[＞]
button to enter the sub-menu checking
screen.
f
f
Using the
[∧]/[∨]
buttons, select a sub-menu number and press the
[＞]
button to enter data checking screen.
f
f
When you enter the checking stage, the current setting value will be displayed.
f
f
Press the
[<]
button to move previous setting value.
f
f
While configuring the sub manu setting, press the ESC button to exit to normal menu.
•
While configuring the checking, press the ESC button to exit to the sub-menu setting screen.
•
When you don't enter any buttons for more than 3 minutes, you will be back to normal mode.
NOTE
EHS_MONO- KIT_IB_05402A-01_BOOK.indb 35
2016-03-29 오후 5:44:21
