E-
15
ENGLISH
Using the DMS through the Web (Continued)
5
[Current Temperature] Selection.
When selecting the check box, display the current temperature of the whole
installed indoor units.
In order to return to the monitoring screen, select again the [Current Temperature].
6
Emergency Stop status button is displayed in red if the DMS is currently in the
emergency stop status. In the emergency stop status, the indoor units may be
monitored but not controlled.
( The emergency stop function can only be used when the external contact control of
the DMS is used.)
Consult the installer to use the emergency stop function.
Refer to the installation manual for explanation about the emergency stop.
7
Communication Error Display.
When a communication error between the DMS and the lower controller is
occurred, a message as below is displayed as red.
“!!! Communication error
Please check the error history menu for error reference.”
During the normal operation, it is not displayed on the screen.
Note
When the advanced functions (such as sleep mode, Energy saving function) are
selected through wired/wireless remote controllers, temperature on the remote
controllers and DMS may be displayed differently.
When you control the indoor units through DMS, all the advanced function will
be disabled.
MIM-D00_IB_E_29777-2.indd 15
2009-05-08 ｿﾀﾀ・10:08:11