70
Field Name
Description
Station ID
This is the NID (Network ID) or the name of the station if
set. The name is obtained from the NID name table.
IP Address
The IP address of the station ( if known )
“Associated” means that the station is associated with this
Access Point.
“Disconnected” means that the station is not associated
with this AP could however, be associated with another AP.
“Detected” means that frames from the station have been
seen but, that it has not been associated.
“Bridged” entries are wired stations that are reached
through a different Access Point than the current displayed
one.
“Is Bridging” is Access Points detected over the air. These
other Access Points provide for wireless bridging between
two separate LAN segments.
Status
“Local AP” means that it is another AP on the same LAN.
This entry will be seen where roaming is implemented.
Channel
The radio channel of the station.
AP Serving
If the station is associated the words “This Unit” will
appear.
Otherwise the NID or name of the Access Point to which
the station is associated will be shown.
Power Mode
If the station supports “Power Save Poll” mode of
IEEE802.11, this field will indicate that power saving is
active with the word “On”.
