25
3.5.3 Setting Network Properties for “StructureNet” mode
1.
Do the step 1 and 2 mentioned in the previous section. (Section 3.4.2)
2.
In “
Access Point Client Properties
” box, check the
StructureNet
radio button in
Operating Mode
list.
3. Enter the desired
ESS ID
for the Access Point you are authorized to use.
(ESS ID is set to “magicwave” as default, but you can change it to another.)
4. Change some options if you want.
5. Click on “
OK
” to finish up the setup.
6. Do the step 9 mentioned in the previous section (Section 3.4.2) to make the change effective.
