Samsung M337, User Manual

Page: 199 / 384

Wireless network setup
199
2. Using a Network-Connected Machine
10
When the wireless network set up is completed, disconnect the USB
cable between the computer and machine. Click
Next .
11 Follow the instructions in the installation window.
Ad hoc via USB cable
If you do not have an access point (AP), you may still connect the machine
wirelessly to your computer by setting up an Ad-hoc wireless network by
following the simple steps below.
Items to prepare
• Network-connected computer
• Software CD that was provided with your machine
• A machine installed with a wireless network interface
• USB cable
Creating the ad hoc network in Windows
1 Check wheter the USB cable is connected to the machine.
2 Turn on your computer, access point, and machine.
3
Insert the supplied software CD into your CD-ROM drive.
If the installation window does not appear, click Start > All programs >
Accessories > Run .
X:\ Setup.exe replacing “X” with the letter, which represents your CD-
ROM drive and click OK .
• For Windows 8,
If the installation window does not appear, from Charms , select
Search > Apps and search for Run . Type in X:\Setup.exe, replacing
“X” with the letter that represents your CD-ROM drive and click OK .
If “ Tap to choose what happens with this disc .” pop-up window
appears, click the window and select Run Setup.exe .
4 Review and accept the installation agreements in the installation
window. Then, click
Next .