Samsung Laptop User Manual Download

Page: 137 / 172

Reinstalling when Windows does

not start

When Windows does not start, boot up

with the SYSTEM RECOVERY MEDIA

and from there you can reinstall Windows.

Insert the

SYSTEM RECOVERY

MEDIA

into the DVD drive and restart

the computer.

If the

Press any key to boot from

CD or DVD...

message appears

while booting, press any key on the

keyboard.

After a while, the Options windows

such as Language, Time, Keyboard,

etc. appear. Confirm the settings and

click the

Next

button.

If the

Select Windows Installation

window appears, click

Install Now

For Windows 7, the screen asking for

the operating system to be installed

may appear depending on the

version. If you click the

Next

button,

the screen of Step appears.

If the User Agreement screen

appears, select

I accept the license

terms and

then click

Next

For Windows 7, this screen may not

appear depending on the version.

When the window asking for the

installation type appears, click

Custom

For Windows 7, this screen may not

appear depending on the version.

When a window appears asking for

the location to install the operating

system to, select the partition of the

disk drive and then click the

Next

button.

Drive D includes an area to save the

backup image used by Samsung

Recovery Solution. Installing

Windows to drive C is recommended.

Summary of Contents for Laptop













































































































































































Search results

Summary of Contents for Laptop

Reviews:

Related manuals for Laptop

Brands by name

Popular brands

Samsung Laptop, User Manual

Search results

Summary of Contents for Laptop

Reviews:

Related manuals for Laptop

Brands by name

Popular brands