Samsung Laptop User Manual Download Page 131

Page: 131 / 172

When the initial menu screen

appears, click

Restore

and then click

Data Restore

Select a backup item to be restored

in the backup list and click the

Next

button.

Select a folder for the restoration and

click the

Next

button. Data Restore

begins.

When Data Restore is completed,

check if the data has been restored to

the specified folder.

System Software Function

Using System Software

The System Software function is a

function that enables you to reinstall

device drivers and System Software

Programs or back up those programs.

The system software function is

supported by

Samsung Recovery

Solution

version or later.

Therefore, the function may not be

supported depending on the version.

The System Software Installation

Function only works in Microsoft

Windows.



Installing System Software

Click

Start > All Programs >

Samsung > Samsung Recovery

Solution > Samsung Recovery

Solution.

Summary of Contents for Laptop













































































































































































Search results

Summary of Contents for Laptop

Reviews:

Related manuals for Laptop

Brands by name

Popular brands

Samsung Laptop, User Manual

Search results

Summary of Contents for Laptop

Reviews:

Related manuals for Laptop

Brands by name

Popular brands