Samsung Laptop User Manual Download

Page: 32 / 172

Laser Safety

All systems equipped with CD or DVD drives comply with the appropriate safety

standards, including IEC 60825-1. The laser devices in these components are classified

as “Class 1 Laser Products” under a US Department of Health and Human Services

(DHHS) Radiation Performance Standard. Should the unit ever need servicing, contact

an authorized service location.



Laser Safety Note:

Use of controls or adjustments or performance of procedures other than those

specified in this manual may result in hazardous radiation exposure. To prevent

exposure to laser beams, do not try to open the enclosure of a CD or DVD drive.



Class 1M laser radiation when operating part is open.

Do not view directly with optical instruments.



Class B invisible laser radiation when open.

Avoid exposure to the beam.

Connect and Disconnect the AC adapter

The socket-outlet shall be installed near the equipment and shall be easily accessible.

Do not unplug the power cord out by pulling the cable only.

Summary of Contents for Laptop













































































































































































Search results

Summary of Contents for Laptop

Reviews:

Related manuals for Laptop

Brands by name

Popular brands

Samsung Laptop, User Manual

Search results

Summary of Contents for Laptop

Reviews:

Related manuals for Laptop

Brands by name

Popular brands