Samsung Laptop User Manual Download

Page: 121 / 172



Restore Function

Using this function, you can easily restore your computer to a previous, stable state

when your computer no longer works properly or you are unable to boot up your

computer due to some problem. If you have backed up data, you can restore the

backup data.

Basic Restore

Complete Restore

Data Restore

This function quickly

restores major

Windows files (C:\

Windows) without

touching the user

configuration and

data on the C drive.

This function deletes the entire C

drive and then restores the contents

of the C drive completely.

This function

restores the user

data if the user

previously backed up

data.



Initial Status Restore

This function restores the computer

to the initial status saved when the

computer was run for the first time

after it was purchased.



Complete Backup Restore

This function restores the computer

to the point where the user

performed a

Complete Backup

Restore Functions



Backup Function

You can backup the entire C drive or all your data to another

hard disk drive

DVD

. You can restore the backed up drive or data using the Restore function.

Summary of Contents for Laptop













































































































































































Search results

Summary of Contents for Laptop

Reviews:

Related manuals for Laptop

Brands by name

Popular brands

Samsung Laptop, User Manual

Search results

Summary of Contents for Laptop

Reviews:

Related manuals for Laptop

Brands by name

Popular brands