Settings
Sound
Settings
Picture
ENG
souNd
You can configure various audio options such as the
[Prefered audio type]
,
[Digital volume control]
, etc.
Preferred audio type
This allows selection of which audio type (Stereo or Multichannel) should be used when both are available on
the service selected.
Digital volume control
This menu allows turning on/off volume control for HDMI and SPDIF digital outputs. The default value is off
because the volume of some audio formats, such as AC3, cannot be controlled by the STB. If this setting is set to
[On]
, you can control the volume but the digital audio output becomes available in PCM format instead.
Audio primary
You can change the audio language other than your preferred Audio language.
Audio secondary
You can change the language for the Audio secondary, which is available if an Audio secondary service is
provided by the program provider.
\
Audio primary and secondary options are settings for audio tracks selection preference. That
is, when primary set to Deutsch, and secondary to English
, an Deutsch track will be selected by
default, if available. If Deutsch track is unavailable,
English
track will be selected.
piCturE
You can configure various display options such as the
[Screen resolution]
,
[HDMI aspect ratio]
, etc.
Screen resolution
This allows you to set the output resolution of the video signal. The number indicates the number of lines of
video per frame. The i and p indicate interlaced and progressive scan, respectively. The more lines, the higher
quality.
3D mode
This allows setting of 3D mode if the service selected
provides 3D signal.
Select
[Auto]
to enable 3D mode if mode is recognized
from the signal.
Select
[Off]
to disable 3D mode.
If 3D mode is not recognized automatically although
service is in the 3D format, you can force this mode
manually:
-
[SBS-3D]
: Convert SIDE-BY-SIDE 3D format to the 3D
view
-
[SBS-2D]
: Convert SIDE-BY-SIDE 3D format to the 2D
view
-
[TB-3D]
: Convert TOP-BOTTOM 3D format to the 3D view
-
[TB-2D]
: Convert TOP-BOTTOM 3D format to the 2D view
\
If you use one of the forced 3D formats (not Auto) you should remember to set 3D mode to
[Off]
or
[Auto]
when you change channel, because standard 2D channels will not display correctly.
Anti flicker
This allows turning on and off of the anti-flicker filter. This option may improve analogue video quality.
HDMI aspect ratio
This lets you adjust the output of the STB to the screen size of your TV when you connect them by using an
HDMI cable.
39
