Safety 79
encouraged to try to correct the interference by one or more of the
following measures:
•
Reorient / relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit difference from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rates (SAR) for Wireless Phones
The SAR is a value that corresponds to the relative amount of RF
energy absorbed in the head of a user of a wireless handset.
The SAR value of a phone is the result of an extensive testing,
measuring and calculation process. It does not represent how
much RF the phone emits. All phone models are tested at their
highest value in strict laboratory settings. But when in operation,
the SAR of a phone can be substantially less than the level
reported to the FCC. This is because of a variety of factors
including its proximity to a base station antenna, phone design and
other factors. What is important to remember is that each phone
meets strict federal guidelines. Variations in SARs do not
represent a variation in safety.
All phones must meet the federal standard, which incorporates a
substantial margin of safety. As stated above, variations in SAR
values between different model phones do not mean variations in
safety. SAR values at or below the federal standard of 1.6 W/kg
are considered safe for use by the public.
The highest reported SAR values of the GT-i5800l are:
GSM 850
•
Head: 0.61 W/Kg.
•
Body-worn: 0.94 W/Kg.
GSM 1900
•
Head: 0.52 W/Kg.
•
Body-worn: 0.36 W/Kg.
UMTS V
•
Head: 0.44 W/Kg.
•
Body-worn: 0.43 W/Kg.
UMTS II 1900
•
Head: 0.68 W/Kg.
•
Body-worn: 0.31 W/Kg.
