Samsung ELSR362-00004 User Manual Download Page 8

Page: 8 / 59

Information in this Manual

Information in this Manual

1.1

About this Manual

This is the user

’

s manual for the Samsung 3.6 kWh All in One. This user manual is specially

designed to detail the device

’

s functions and features. Please read this manual before using

the device to ensure safe and proper use.

1.2

Target Group

This user manual applies only to the Samsung 3.6 kWh All in One.

1.3

Additional Information

The user manual and installation manual can be downloaded from the product download
section at

“

https://myess.samsungsdi.com

”

. The specifications of the product can be

changed for improvement without notice.

Also, the software can be updated automatically without notice over the Internet.

1.4

Symbols Used

Symbols

Meaning

CAUTION

This symbol indicates a hazardous situation which could

result in a light injury, if not avoided.

NOTICE

This symbol indicates a hazardous situation which could

result in damage to the property, if not avoided.

Information
This symbol indicates valuable tips for optimum installation

and operation of the product.

Australia (Eng.) 05/2015. Rev1.1

Summary of Contents for ELSR362-00004




























































Search results

Summary of Contents for ELSR362-00004

Reviews:

Related manuals for ELSR362-00004

Brands by name

Popular brands

Samsung ELSR362-00004, User Manual

Search results

Summary of Contents for ELSR362-00004

Reviews:

Related manuals for ELSR362-00004

Brands by name

Popular brands