Samsung ELSR362-00004 User Manual Download Page 45

Page: 45 / 59

Message Description

7.2

General Events

The general events contain warnings and protection.

The warning level events does not stop the generating process. A displayed warning

message automatically disappears as soon as the issue is resolved.

When protection level events occur, the product stop the generating process. The process

may automatically resume as long as the issue is resolved.

Checking event codes is available on the website (

https://myess.samsungsdi.com

If the Internet is not available, the event codes cannot be checked.

7.2.1

INVERTER General Events (Warnings)

Type

Code

Description

Measures

WARNING

E001

GRID UNDER VOLTAGE When the system voltage drops

below standard level.
This is the overall voltage-current

warning message, with no special

change in the sequence.
The warning message disappears on

reversion to the normal state.

E002

GRID OVER VOLTAGE

When the system voltage rises above

standard level.
This is the overall voltage-current

warning message, with no special

change in the sequence. The

warning message disappears on

reversion to the normal state.

E003

BATT UNDER VOLTAGE

When the battery energy voltage

drops below standard level.
This is the overall voltage-current

warning message, with no special

change in the sequence. The

warning message disappears on

reversion to the normal state.

E004

BATT OVER VOLTAGE

When the battery energy voltage

drops above standard level.
This is the overall voltage-current

warning message, with no special

change in the sequence. The
warning message disappears on

reversion to the normal state.

E005

FAN WARNING

When the Fan operation is abnormal.
This is the overall Fan warning

Australia (Eng.) 05/2015. Rev1.1

Summary of Contents for ELSR362-00004




























































Search results

Summary of Contents for ELSR362-00004

Reviews:

Related manuals for ELSR362-00004

Brands by name

Popular brands

Samsung ELSR362-00004, User Manual

Search results

Summary of Contents for ELSR362-00004

Reviews:

Related manuals for ELSR362-00004

Brands by name

Popular brands