Samsung ELSR362-00004 User Manual Download Page 9

Page: 9 / 59

Information in this Manual

Symbols

Meaning

Beware dangerous voltage.
The inverter operates at high voltage. All works related to the

inverter can only be performed by an electrical technician.

Beware of hot surface.
The inverter can become hot during operation.

Avoid contact during operation.

Follow the guidelines in all relevant documents enclosed

along with the inverter.

Do not dispose of the inverter with household wastes.
For further information on disposal, refer to the installation

manual provided.

The CE Indication:
The relevant equipment complies with the requirements in

the EC guidelines.

Number

Symbol

Description

Direct current

Alternating current

Both direct and alternating current

Three-phase alternating current

Australia (Eng.) 05/2015. Rev1.1

Summary of Contents for ELSR362-00004




























































Search results

Summary of Contents for ELSR362-00004

Reviews:

Related manuals for ELSR362-00004

Brands by name

Popular brands

Samsung ELSR362-00004, User Manual

Search results

Summary of Contents for ELSR362-00004

Reviews:

Related manuals for ELSR362-00004

Brands by name

Popular brands