Samsung ELSR362-00004 User Manual Download Page 51

Page: 51 / 59

Message Description

Type

Code

Description

Measures

EVENT

the protection event.
Wait until the event message

disappears. After the event message

is removed, it automatically returns

to normal.
If it is not removed until the time
limit is reached, it is converted to a

significant event.

PROTECTION

E304

NORMAL GRID OFF

PV generation mode is stopped by

the protection event.
Wait until the event message
disappears. After the event message

is removed, it automatically returns

to normal.
If it is not removed until the time

limit is reached, it is converted to a

significant event.

PROTECTION

E305

NORMAL INV DC LINK &

PV I EVENT

PV generation mode is stopped by

the protection event.
Wait until the event message

disappears. After the event message

is removed, it automatically returns

to normal.
If it is not removed until the time

limit is reached, it is converted to a

significant event.

PROTECTION

E306

NORMAL PV V EVENT

PV generation mode is stopped by

the protection event.
Wait until the event message

disappears. After the event message

is removed, it automatically returns

to normal.
If it is not removed until the time

limit is reached, it is converted to a

significant event.

[Table 7-5: PV general events protection list]

7.2.5

System General Events (Protection)

Type

Code

Description

Measures

PROTECTION

E401

TEMPERATURE

Protection

When the switch temperature is

high.
Wait until the event message

disappears. After the event message

is removed, it automatically returns

to normal.

Australia (Eng.) 05/2015. Rev1.1

Summary of Contents for ELSR362-00004




























































Search results

Summary of Contents for ELSR362-00004

Reviews:

Related manuals for ELSR362-00004

Brands by name

Popular brands

Samsung ELSR362-00004, User Manual

Search results

Summary of Contents for ELSR362-00004

Reviews:

Related manuals for ELSR362-00004

Brands by name

Popular brands