Samsung DVD-VR336, Instruction Manual

Page: 60 / 92

60 - English
R
ecording
Making a Timer
Recording
1. Check the antenna cable is connected.
2. Check the remaining time of the disc.
3. Check the date and time are correct.
Make sure the Clock (Setup-Clock Set) must be set
before you proceed with a timer recording.
(See page 24)
1
Press the OPEN/CLOSE button, and place a recordable
disc on the disc tray.
2
Press the OPEN/CLOSE button to close the disc tray.
Wait until LOAD disappears from the front panel
display.
3
With the unit in Stop mode, press the MENU
button.
4
Press the
…†
buttons to select Programme , then
press the OK or
√
button.
You can go to this step directly by pressing the
TIMER REC button.
5
Press the OK or
√
button twice.
• The Timer Recording screen is displayed.
Programme DVD-Recorder
Title List
Playlist
Disc Manager
Programme
Setup
Copy
DVD-RW(VR)
Scheduled Record List
√ √
Scheduled Record List DVD-Recorder
DVD-RW(VR) Current Time 12:00
No. To Source Day Start End Speed Edit
No. 01
Available Time 00:48 SP
DVD PR 01 01 SUN 12:00 14:00 SP
To Source Day Start End Speed
RETURN OK MOVE EXIT
RETURN OK MOVE EXIT
Making a One Touch
Recording (OTR)
One-Touch Recording (OTR) allows you to add
recording time in preset minute increments up to 9
hours by pressing the
REC button repeatedly.
1
Press the PROG/TRK ( / ) buttons or number
buttons to select the station to record.
If you want to record through a connected external
component, press the
INPUT SEL. button to select
an appropriate external input (AV1, AV2 or DV).
2
Press the REC button.
3
While in Record mode, press the REC button
again to activate One-Touch Recording (OTR).
• Record length 0:30 appears on the On-Screen
Display and the DVD Recorder & VCR will record
for exactly 30 minutes.
4
Continue pressing REC to add recording time in
preset minute increments up to 9 hours.
• The DVD Recorder & VCR stops recording
automatically when the time has elapsed.
To stop recording
Press the STOP ( ) button.
The message “Press STOP button once more to
cancel Timer Record” is displayed.
Press the
STOP ( ) button again.
The message “Updating the disc information. Please
wait for a moment” is displayed.
■
The timer counter decreases by the
minute from 9:00 to 0:00, then the
DVD
Recorder & VCR
stops recording.
Note
01010Q-VR330/336-XSA-ENG2 2006.3.22 12:20 PM Page 60