18 -
English
C
onnections
You will enjoy high quality images. S-Video seperates
the picture element into black and white(Y) and colour(C)
signals to present clearer images than composite video
output mode.
1
Connect one end of the S-Video cable into the
S-VIDEO
output jack on the rear of the DVD
Recorder & VCR.
2
Plug the other end of the S-Video cable into the
appropriate input connector on the television.
3
Connect one end of the audio cable into the
AUDIO
output jacks on the rear of the DVD
Recorder & VCR.
• Take care to respect the colour coding of the left
and right channels.
4
Plug the other end of the audio cables into the
appropriate input connectors on the television.
Connecting the
S-Video Cable
You will enjoy high quality accurate colour reproduction
images. Component video seperates the picture
element into black and white(Y), blue(P
B
), red(P
R
)
signals to present most clear and clean images.
1
Connect Component video cables between the
COMPONENT VIDEO OUT
jacks on the rear of
the DVD Recorder & VCR and
COMPONENT
VIDEO IN
jacks on the rear of the TV.
2
Connect audio cables between the audio output
jacks on the rear of the DVD Recorder & VCR and
AUDIO IN
jacks on the rear of the TV.
• Take care to respect the colour coding of the up
and down channels.
• Press the input selector on your TV remote
control until the Component signal from the DVD
Recorder & VCR appears on your TV screen.
❚
Progressive Scan
Your TV must support progressive scan input to allow
to watch progressive scan component video out.
(See page 38)
COMPONENT INPUT
Connecting the
Component Video Cable
01010Q-VR330/336-XSA-ENG1 2006.3.22 12:18 PM Page 18
