English
- 17
C
onnections
RF Cable
Connecting DVD Recorder
& VCR to the TV using the
RF Cable
1
Remove the aerial or network input cable from the
television.
2
Connect this cable to the 75Ω aerial jack marked
on the rear of your DVD Recorder & VCR.
3
Plug the RF Cable supplied into the
jack on
your DVD Recorder & VCR.
4
Plug the other end of the RF Cable into the
connector previously used for the aerial on the
television.
Make sure that both the television and the
DVD Recorder & VCR are switched off before
connecting the cables.
Note
Connecting DVD Recorder
& VCR to the TV using the
Audio/Video Cable
You can connect your DVD Recorder & VCR to the
television using the Audio/Video cable if the appropri-
ate input is available on the television. You thus:
• Obtain better quality sound and pictures
• Simplify the setting up procedure of your DVD
Recorder & VCR
1
Connect the RF Cable.
2
Connect one end of the Audio/Video cable to
the Video output and Audio L, R output jack on
the rear of the DVD Recorder & VCR.
3
Plug the other end into the appropriate
connector on the television.
Regardless of the type of connection chosen,
you must always connect the RF Cable sup-
plied. Otherwise, no picture will be visible on the
screen when the DVD Recorder & VCR is
switched off.
Make sure that both the television and the
DVD Recorder & VCR are switched off before
connecting the cables.
Note
ANT IN
Aerial
Aerial cable
RF cable
01010Q-VR330/336-XSA-ENG1 2006.3.22 12:18 PM Page 17
