Samsung DVD-V6800, User Manual

Page: 11 / 263

English
-
11
Connecting DVD-VCR to the TV
using the Component Video Cable
(DVD only)
Your TV must support progressive scan input to
allow you to watch component video output.
You will enjoy high quality accurate colour repro-
duction images. Component video seperates the
picture element into black and white (Y), blue
(Pb), red (Pr) signals to present most clear and
clean images.
1
Connect Component video cables between
the
COMPONENT VIDEO OUT jacks on the
rear of the DVD-VCR and COMPONENT
VIDEO IN jacks on the rear of the TV.
2
Connect audio cables between the AUDIO
LINE OUT jacks on the rear of the DVD-VCR
and AUDIO IN jacks on the rear of the TV.
• Take care to respect the colour coding of
the left and right channels.
COMPONENT VIDEO OUT
COMPONENT INPUT
COMPONENT VIDEO IN
1
2
AV Receiver Connections
Digital Audio out Jack
To take full advantage of the movie theater
experience that DVD offers, you may want to
connect your DVD-VCR to a complete Surround
Sound system, including an A/V Receiver and
six Surround Sound speakers. If your A/V
receiver is equipped with a Dolby Digital
Decoder, you have the option to bypass the
DVD-VCR’s built-in Dolby Digital Decoder. Use
the Digital Audio Out connection below.
1
Connect a Digital Audio coaxial cable from the
Digital Audio Out jacks on the panel of the DVD-
VCR to their corresponding Digital Audio Input
jacks on your A/V Receiver:
To Digital Audio Input of an A/V Receiver
with a Dolby, MPEG2, DTS, Digital Decoder
01604B_V6800_XEB_Eng 3/18/08 2:42 PM Page 11