E-
60
Standard Object Types Supported
Object Type
Support
Description
Analog Input
[Indoor temperature], [The power value after the basic date],
[The number of hours usage of an indoor unit after the basic date],
[Power value within period], [The number of hours usage of an indoor unit within
period], [Indoor unit error code], [AHU error code], [ERV error code], [EHS error code],
[Current temperature of water out], [Current temperature of hot water],
[Centralized controller error code], [Interface module error code],
[SIM interface module error code], [DMS status], [DMS error], [Discharge current
temperature], [Outside temperature]
Analog Output
Analog Value
[Set temperature], [Setting lower temperature limit],
[Setting upper temperature limit], [Discharge cooling set temperature],
[Discharge heating set temperature], [Cool capacity compensation],
[Heat capacity compensation], [Set temperature of water out]
[Set temperature of hot water], [Lower temperature limit for water out],
[Upper temperature limit for water out], [Upper temperature limit for hot water]
Averaging
Binary Input
[DI], [Filter sign status], [Compressor status], [Displayed temperature type],
[Thermostat usage], [Outing]
Binary Output
[DO], [Filter sign reset], [All Device off]
Binary Value
[Power On/Off control], [Setting the fucntion of limiting lower temperature]
[Setting the function of limiting upper temperatue ], [SPI setting],
[HumanSensor setting], [Humidification setting], [Outdoor air intake setting],
[Ourdoor cooling setting], [Apply lower temperature limit for water out],
[Apply upper temperature limit for water out],
[Apply upper temperature limit for hot water], [On/Off status of hot water mode],
[Status of quiet operation]
Calendar
Command
Device
[DMS], [A/C Indoor Unit], [ERV], [AHU], [EHS], [SIM], [Centralized controller], [Interface
module], [DDC]
Event Enrollment
File
Group
Life Safety Point
Life Safety Zone
Loop
Multi-state Input
[Current humidity status]
Multi-state Output
Multi-state Value
[Operation mode control], [Fan speed control], [Air flow direction control],
[Setting Cool only/ Heat only/ No Limit ], [Control Enable RC/ Disable RC /Level1],
[Set humidity status], [Status of hot water operation mode]
Notification Class
[AC Indoor Notify], [ERV Notify], [AHU Notify], [Centralized Controller Notify],
[Interface Module Notify], [SIM Notify], [Gateway Notify], [EHS Notify]
Program
Pulse Converter
Schedule
Trend Log
Access Door
Event Log
Load Control
Structured View
Trend Log Multiple
NASAS_MIM-B17N_BACnet Gateway_IM_EN_03719A(1).indd 60
2013-04-25 오전 10:14:42
