E-
2
Safety Precautions
Read carefully this installation manual before
installation and check if the BACnet Gateway is installed
correctly after installation.
Do not attempt to install or repair this BACnet Gateway
by yourself.
This BACnet Gateway contains no user-serviceable parts.
Always consult authorized service personnel for repairs.
When moving, consult authorized service personnel for
disconnection and installation of the BACnet Gateway.
Ensure that the wall is strong enough to support the
weight of the BACnet Gateway.
Must install the BACnet Gateway with rated power
supply.
The BACnet Gateway must be installed according to
the national electrical rules by an installation specialist.
If you wish to uninstall the BACnet Gateway, consult an
authorized installation center.
WARNING
CAUTION
Do not use inflammable gases near the BACnet
Gateway.
Do not install the BACnet Gateway in a location where
it will come into contact with combustible gases,
machine oil, sulphide gas, etc.
Avoid locations where acid/alkali solution or special
spray is used.
Choose a location that is dry and sunny, but not exposed
to direct sunlight. Suitable temperature is between
0°C(32°F) and 39°C(102.2°F).
Do not spill water into the BACnet Gateway.
Do not apply tensile strength to the cable to avoid cable
damage.
Do not press the buttons with a sharp object.
Do not connect the power cable to the control terminal.
If the BACnet Gateway is installed in a hospital or other
special places, it should not affect other electronic
devices.
This installation manual describes how to install the BACnet Gateway. For installation
of other optional accessories, refer to the appropriate installation manual.
BACnet® is a registered trademark of American Society of Heating,
Refrigerating and Air-Conditioning Engineers (ASHRAE).
NASAS_MIM-B17N_BACnet Gateway_IM_EN_03719A(1).indd 2
2013-04-25 오전 10:14:31
