E-
25
Reading EHP Watt-hour Meter (Continued)
Channel setting by indoor unit
1
Click [Channel setting by indoor unit].
2
Click [Edit] from the ‘Channel setting by indoor unit’ screen.
3
Check the address and the channel information of the SIM/PIM interface module
which is connected to the watt-hour meter.
If the SIM/PIM interface modules with addresses 0 ~ 7 executes tracking, it will be
displayed as 16~23 in BACnet Gateway.
Below table shows the channel information of the terminal which SIM and
watt-hour meter is connected. (Terminal block 1 is on the most left side in SIM.)
PIM: Channel 1 is on the most left side and 8 channels are arranged in a line.
4
Check the information of indoor/outdoor unit which is connected to watt-hour
meter.
3
7
2
1
Terminal block
Location
Terminal block 1
Terminal block 2
Terminal block 3
Terminal block 4
Top part
1
2
3
4
Bottom part
5
6
7
8
NASAS_MIM-B17N_BACnet Gateway_IM_EN_03719A(1).indd 25
2013-04-25 오전 10:14:38
